You are here:
Start 
Productos Tienda de Masaje Cuencos Tibetanos
Cuencos Tibetanos
Los círculos esotéricos Occidentales atribuyen incontables efectos preventivos y curativos al sonido de los cuencos tibetanos. Para realizar la terapia estos cuencos se colocan en el cuerpo y se golpean con un mazo.
Western esoteric circles attributes countless preventive and curative effects to the sound of the singing bowls and Sound Gongs.These singing bowls are placed on the body and struck with a mallet. The Peter Hess® high quality singing bowls have been developped during 20 years of experience with sound massage, sound massage-therapy and sound pedagogics. They are especially designed with sound massage and therapy in mind. Depending on the body part it is used for, the bowls reach a specific range of sounds.
Find out more about singing bowls
Singing bowls oringate in the Eastern culture in Japan, China, Thailand and the Himalayas. They are similar to bells, which are struck from the outside. The existence of singing bowls can be traced back as far as such as metals were processed by human mankind. The clay gives form and the sound of harmony and health is a basic need of mankind. Most bowls were applied in meditation. The tone targets inner clarity.
Singing bowls oringate in the Eastern culture in Japan, China, Thailand and the Himalayas. They are similar to bells, which are struck from the outside. The existence of singing bowls can be traced back as far as such as metals were processed by human mankind. The clay gives form and the sound of harmony and health is a basic need of mankind. Most bowls were applied in meditation. The tone targets inner clarity.
The Peter Hess high quality singing bowls are made via the experience gained since 1984 with the development of the Peter Hess-sound massage, sound therapy and sound pedagogy. The have been constantly evolving. Thus a control system for the progressive development of the singing bowls was set-up. This includes the specific production conditions in India and Nepal. Fair trade and other positive aspects of manufacturing conditions must be met. Permanent controls and further studies and research in Germany contribute to the continuous improvement. The research of scientists Drs Halina and Marek Potalski at the Academy in Poznan / Poland show that oscillatory behavior and the frequency spectrum optimally match their application. No other bowls are manufactured according to such criteria. Our bowls find their professional application in the areas of recreation and health care, education, counseling, therapy and in medicinal and curative sector professions.
Metal composition and quality
Until recent years, we have made the singing bowls in the traditional composition based on our experience and research. The composition and the manufacturing process in terms of sound and vibration behavior were always improved. It is very important that the metal composition is strictly observed and consists solely of pure metals. The tradition of the old bowls is heeded because part of an old singing bowl is added to each melt of the traditional 12 metals. These old singing bowls contain up to twelve metals, partly in homeopathic potency, which have an important significance in the ancient healing essence of Ayurveda and Alchemy. For optimum sound and vibration behavior a particular alloy of bronze is important. The alloy is poured into a thick disk. In a hot state 4 to 5 artisans
make the singing bowl with a weight of about two kilograms during about 32 hours. One of our engineers in northern India and "Tamraka" constantly monitors the manufacturing of the singing bowl - supported by the old knowledge of metals in Nepal. There are also regular electronic controls and frequency analyzes. Only the best and most suitable therapy singing bowls receive the Predicate "Peter Hess ® therapy singing bowls".
Until recent years, we have made the singing bowls in the traditional composition based on our experience and research. The composition and the manufacturing process in terms of sound and vibration behavior were always improved. It is very important that the metal composition is strictly observed and consists solely of pure metals. The tradition of the old bowls is heeded because part of an old singing bowl is added to each melt of the traditional 12 metals. These old singing bowls contain up to twelve metals, partly in homeopathic potency, which have an important significance in the ancient healing essence of Ayurveda and Alchemy. For optimum sound and vibration behavior a particular alloy of bronze is important. The alloy is poured into a thick disk. In a hot state 4 to 5 artisans
make the singing bowl with a weight of about two kilograms during about 32 hours. One of our engineers in northern India and "Tamraka" constantly monitors the manufacturing of the singing bowl - supported by the old knowledge of metals in Nepal. There are also regular electronic controls and frequency analyzes. Only the best and most suitable therapy singing bowls receive the Predicate "Peter Hess ® therapy singing bowls".
Production of Singing Bowls
The melt is prepared from pure metals. The exact composition of the alloy is very important. First a thick disk is cast. The weight of the wheel is slightly higher than that of the singing bowl which should be produced. The singing bowl is forged in a hot state. Depending on the size of the singing bowl it is heated 20 to 90 times. Four to six skilled craftsmen forge the singing bowl in perfect rhythm. The shape of the Singing Bowl is already recognizable. After each annealing process it is driven higher and higher. Recent refinements in the form of a singing bowl can be achieved by special forging techniques. Repeated annealing and quenching the singing bowl to a quite cool state is done. Due to the manual bowl scraping and cleaning it gets its shiny surface.
The melt is prepared from pure metals. The exact composition of the alloy is very important. First a thick disk is cast. The weight of the wheel is slightly higher than that of the singing bowl which should be produced. The singing bowl is forged in a hot state. Depending on the size of the singing bowl it is heated 20 to 90 times. Four to six skilled craftsmen forge the singing bowl in perfect rhythm. The shape of the Singing Bowl is already recognizable. After each annealing process it is driven higher and higher. Recent refinements in the form of a singing bowl can be achieved by special forging techniques. Repeated annealing and quenching the singing bowl to a quite cool state is done. Due to the manual bowl scraping and cleaning it gets its shiny surface.
Ultimo actualizado: viernes, 18 septiembre 2015 18:54
 |
Nuestra página Web
Agujas de acupuntura Accesorios de acupuntura Lampara TDP Moxas y parches Ventosas Otros Productos de MTC Imanes, Esferas y Semillas Vendajes Neuromusculares Material de Fisioterapia Comprar Tape y Vendajes Funcionales Tienda de Masaje Comprar Aceites de Masaje Aceites de masajes botellas de 5 litros Aceite de Masaje Neutros Aceites base de Masaje Aceites Ayurveda para masaje Bio Massage Oils Camillas de Masaje Comprar Aceites Esenciales Crema de Masaje Bálsamos de Masaje Lociones para Masaje Libros sobre masaje Ventosas para masaje Accesorios de Masaje Kits de Muestras Productos de Spa Cuencos Tibetanos Peter Hess Therapy Singing Bowls Peter Hess Bolo Singing Bowls Peter Hess Singing Bowls with loop and handle Peter Hess HIMALAYA Singing Bowls Peter Hess ASSAM Cuencos Tibetanos Peter Hess ZEN Singing Bowls Peter Hess Sangha meditation Singing Bowls Fen-Gongs Tam Tam Gong Tibetan Cymbals Platillos Mazos Fundas y Marcos para Gongs Libros y DVD de terapia curativa con sonido Velas auriculares Material Medico Ayurveda food supplementsListar todos |
|
|
Búsqueda Avanzada |
|
| ¿Olvidó su contraseña? | |
| ¿Olvidó su usuario? | |
| ¿Todavía no está registrado? Registrarse | |
|
|
Who's Online
Tenemos 226 invitados conectado
